https://carbonfiberinteriors.com Tue, 25 Aug 2026 21:27:53 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://carbonfiberinteriors.com/real-carbon-fiber-interior-center-console-cover-trim-for-porsche-cayenne-2011-17/ https://carbonfiberinteriors.com/real-carbon-fiber-interior-center-console-cover-trim-for-porsche-cayenne-2011-17/#comments Mon, 27 Jul 2026 19:47:44 +0000 admin ]]> https://carbonfiberinteriors.com/real-carbon-fiber-interior-center-console-cover-trim-for-porsche-cayenne-2011-17/









Condition: 100% Brand New. Easy to installation, Please keep the surface clean and dry. Find the exact location where to set it before removing the tape ; -Clean the installation areas surface, no sand/dust; -Remove the tape and place the product at the exact position, press it to make a good adhesive; -No wash and move within 48 hours; -Better to use a lighter or a hair dryer to provide a slight heat for the 3M tape after removing, it will improve its stickiness. In case it fall off for some car models, just add some tape and put the cover back on, then they will work perfectly. It can not be changed once the order is completed. Your recognition will make us more confident to develop business and serve you better. Here you will get the best product & customer service. Our shop specializes in all kinds of Car Parts decorations, trim For BMW, Benz, Land rover, Toyota tacoma, subaru toyota, toyota Supra.

]]> https://carbonfiberinteriors.com/real-carbon-fiber-interior-center-console-cover-trim-for-porsche-cayenne-2011-17/feed/ 0 https://carbonfiberinteriors.com/23pcs-carbon-fiber-interior-full-kits-trim-for-lexus-ct200h-2011-17/ https://carbonfiberinteriors.com/23pcs-carbon-fiber-interior-full-kits-trim-for-lexus-ct200h-2011-17/#comments Sun, 10 May 2026 03:16:07 +0000 admin ]]> https://carbonfiberinteriors.com/23pcs-carbon-fiber-interior-full-kits-trim-for-lexus-ct200h-2011-17/













NOTE:To make sure you will receive the perfect size product for your car, please send us a photo of the part of your car, we will check and respond. Descriptions: Material: Carbon fiber Suitable car model: For Lexus CT200h 2011-17 Feature: Waterproof, high-quality, durable, high temperature resistance….. Make your car more cool Make your car look more graded Protect your car Installation: Easy installed and No modification needed. Please clean the surface before installation. Compare the position and adjust it. Make sure the Temperture is not too low, if it is in Winter when you installation, please make the carbon fiber warm by Hot air blower, so it will soft and easy to be install. Daub adhesion promoter on the surfact to make it stick strongly. Tear off the sticker and stick it. Press it to make it stick strongly.

]]> https://carbonfiberinteriors.com/23pcs-carbon-fiber-interior-full-kits-trim-for-lexus-ct200h-2011-17/feed/ 0 https://carbonfiberinteriors.com/65pcs-carbon-fiber-full-interior-kit-cover-trim-for-bmw-x3-f25-x4-f26-2011-17-3/ https://carbonfiberinteriors.com/65pcs-carbon-fiber-full-interior-kit-cover-trim-for-bmw-x3-f25-x4-f26-2011-17-3/#comments Mon, 08 Dec 2025 02:28:49 +0000 admin ]]> https://carbonfiberinteriors.com/65pcs-carbon-fiber-full-interior-kit-cover-trim-for-bmw-x3-f25-x4-f26-2011-17-3/

























65Pcs Carbon Fiber Full Interior Kit Cover Trim For BMW X3 F25 X4 F26 2011-17. We can make it for RHD. Premium Material: Made from high-quality carbon fiber with a 3mm ultra-clear polyurethane coating, our stickers offer a visually stunning 3D effect with a soft touch. Versatile Features: Our carbon fiber stickers are self-adhesive, waterproof, scratch resistant, and anti-aging. They also have high-temperature resistance, making them perfect for any car interior. Easy Installation: Simply tear off the protective film on the back and apply the sticker directly. It’s that easy! Stylish Upgrade: With our carbon fiber stickers, you can transform your car’s interior from ordinary to extraordinary. With their sleek and stylish design, they’ll make your car stand out from the crowd. Note: In cold weather or if the product feels hard, use a hair dryer to heat the back side to soften the product and increase adhesion. ? 65Pcs Carbon Fiber Full Interior Kit Cover Trim. Simulated installation: Compare and adjust the position of the product installed on the vehicle to the exact position. ?? Cleaning: Clean the body with towel or water on the parts to be installed. ?? Precautions: Before installation, the body must be kept dry and free of dust, oil, wax and 3M glue on the body. The product must be heated when the temperature is lower than 10? . ?? Installation: Tear off the adhesive protective paper on the back of the main body (you can use a hot-air blower to heat the double-sided adhesive tape properly) and stick it to a suitable position, then press it hard for a while. ?? It is better not to see water within 2-3 days after installing the trim strip, otherwise the adhesion will be affected. If you satisfy with your item, please leave us a postive feedback, we will be very appreciated. We will work hard to make it right and make you satis. All messages will be answered within. Thank you for your business! Front, Rear, Left, Right. Easy Installation, Self-Adhesive, Waterproof.

]]> https://carbonfiberinteriors.com/65pcs-carbon-fiber-full-interior-kit-cover-trim-for-bmw-x3-f25-x4-f26-2011-17-3/feed/ 0 https://carbonfiberinteriors.com/carbon-fiber-interior-center-gear-panel-cover-trim-door-trim-bmw-x3-f25-2011-17/ https://carbonfiberinteriors.com/carbon-fiber-interior-center-gear-panel-cover-trim-door-trim-bmw-x3-f25-2011-17/#comments Mon, 26 May 2025 11:12:42 +0000 admin ]]> https://carbonfiberinteriors.com/carbon-fiber-interior-center-gear-panel-cover-trim-door-trim-bmw-x3-f25-2011-17/











Removed from a 2015 BMW X3 m sport should fir all F25 models but please check first, standard bmw trim wrapped in a carbon fibre wrap has some bubbles but still looks good in the car, open to sensible offers. Will include the vent and light switch trim as seen in photos.

]]> https://carbonfiberinteriors.com/carbon-fiber-interior-center-gear-panel-cover-trim-door-trim-bmw-x3-f25-2011-17/feed/ 0 https://carbonfiberinteriors.com/65pcs-carbon-fiber-full-interior-kit-cover-trim-for-bmw-x3-f25-x4-f26-2011-17-2/ https://carbonfiberinteriors.com/65pcs-carbon-fiber-full-interior-kit-cover-trim-for-bmw-x3-f25-x4-f26-2011-17-2/#comments Thu, 15 May 2025 10:49:48 +0000 admin ]]> https://carbonfiberinteriors.com/65pcs-carbon-fiber-full-interior-kit-cover-trim-for-bmw-x3-f25-x4-f26-2011-17-2/

























65Pcs Carbon Fiber Full Interior Kit Cover Trim For BMW X3 F25 X4 F26 2011-17. We can make it for RHD. Premium Material: Made from high-quality carbon fiber with a 3mm ultra-clear polyurethane coating, our stickers offer a visually stunning 3D effect with a soft touch. Versatile Features: Our carbon fiber stickers are self-adhesive, waterproof, scratch resistant, and anti-aging. They also have high-temperature resistance, making them perfect for any car interior. Easy Installation: Simply tear off the protective film on the back and apply the sticker directly. It’s that easy! Stylish Upgrade: With our carbon fiber stickers, you can transform your car’s interior from ordinary to extraordinary. With their sleek and stylish design, they’ll make your car stand out from the crowd. Note: In cold weather or if the product feels hard, use a hair dryer to heat the back side to soften the product and increase adhesion. ? 65Pcs Carbon Fiber Full Interior Kit Cover Trim. Simulated installation: Compare and adjust the position of the product installed on the vehicle to the exact position. ?? Cleaning: Clean the body with towel or water on the parts to be installed. ?? Precautions: Before installation, the body must be kept dry and free of dust, oil, wax and 3M glue on the body. The product must be heated when the temperature is lower than 10? . ?? Installation: Tear off the adhesive protective paper on the back of the main body (you can use a hot-air blower to heat the double-sided adhesive tape properly) and stick it to a suitable position, then press it hard for a while. ?? It is better not to see water within 2-3 days after installing the trim strip, otherwise the adhesion will be affected. If you satisfy with your item, please leave us a postive feedback, we will be very appreciated. We will work hard to make it right and make you satis. All messages will be answered within. Thank you for your business! Front, Rear, Left, Right. Easy Installation, Self-Adhesive, Waterproof.

]]> https://carbonfiberinteriors.com/65pcs-carbon-fiber-full-interior-kit-cover-trim-for-bmw-x3-f25-x4-f26-2011-17-2/feed/ 0 https://carbonfiberinteriors.com/65pcs-carbon-fiber-full-interior-kit-cover-trim-for-bmw-x3-f25-x4-f26-2011-17/ https://carbonfiberinteriors.com/65pcs-carbon-fiber-full-interior-kit-cover-trim-for-bmw-x3-f25-x4-f26-2011-17/#comments Sat, 22 Feb 2025 08:36:07 +0000 admin ]]> https://carbonfiberinteriors.com/65pcs-carbon-fiber-full-interior-kit-cover-trim-for-bmw-x3-f25-x4-f26-2011-17/

























65Pcs Carbon Fiber Full Interior Kit Cover Trim For BMW X3 F25 X4 F26 2011-17. We can make it for RHD. Premium Material: Made from high-quality carbon fiber with a 3mm ultra-clear polyurethane coating, our stickers offer a visually stunning 3D effect with a soft touch. Versatile Features: Our carbon fiber stickers are self-adhesive, waterproof, scratch resistant, and anti-aging. They also have high-temperature resistance, making them perfect for any car interior. Easy Installation: Simply tear off the protective film on the back and apply the sticker directly. It’s that easy! Stylish Upgrade: With our carbon fiber stickers, you can transform your car’s interior from ordinary to extraordinary. With their sleek and stylish design, they’ll make your car stand out from the crowd. Note: In cold weather or if the product feels hard, use a hair dryer to heat the back side to soften the product and increase adhesion. ? 65Pcs Carbon Fiber Full Interior Kit Cover Trim. Simulated installation: Compare and adjust the position of the product installed on the vehicle to the exact position. ?? Cleaning: Clean the body with towel or water on the parts to be installed. ?? Precautions: Before installation, the body must be kept dry and free of dust, oil, wax and 3M glue on the body. The product must be heated when the temperature is lower than 10? . ?? Installation: Tear off the adhesive protective paper on the back of the main body (you can use a hot-air blower to heat the double-sided adhesive tape properly) and stick it to a suitable position, then press it hard for a while. ?? It is better not to see water within 2-3 days after installing the trim strip, otherwise the adhesion will be affected. If you satisfy with your item, please leave us a postive feedback, we will be very appreciated. We will work hard to make it right and make you satis. All messages will be answered within. Thank you for your business! Front, Left, Rear, Right. Easy Installation, Self-Adhesive, Waterproof.

]]> https://carbonfiberinteriors.com/65pcs-carbon-fiber-full-interior-kit-cover-trim-for-bmw-x3-f25-x4-f26-2011-17/feed/ 0 https://carbonfiberinteriors.com/real-carbon-fiber-console-gear-shift-panel-cover-fit-for-porsche-cayenne-2011-17/ https://carbonfiberinteriors.com/real-carbon-fiber-console-gear-shift-panel-cover-fit-for-porsche-cayenne-2011-17/#comments Thu, 22 Aug 2024 01:00:52 +0000 admin ]]> https://carbonfiberinteriors.com/real-carbon-fiber-console-gear-shift-panel-cover-fit-for-porsche-cayenne-2011-17/












Real Carbon Fiber Console Gear Shift Panel Cover Fit for Porsche Cayenne 2011-17. Porsche Cayenne 2011 2012 2013 2014 2015 2016 2017. Console Gear Shift Panel Decorative. Cover Trim Car Accessories Car Styling Car Trim Car Parts. 100% Brand new (Never Been Used or Installed). Made of high quality. (We have these colors:Carbon Fiber/Red Carbon Fiber). Carbon fiber has excellent performance, high temperature resistance under non-oxidizing environment, good corrosion resistance, good X-ray permeability, good thermal conductivity, and good electromagnetic shielding performance. The original car data mold, durable and non-fading. One-piece compression molding, smooth surface and sufficient texture. After installation, the grade of the original car is instantly upgraded, and the configuration is increased immediately, which can better protect the original car and sist scratches and wear. Paste installation, with auto 3M tape on the back which can be installed after tearing off. It is firm and stable, beautiful and protective, covering aging and improving the grade. Tips:You’d better not make it contact with any liquid within 48 hours after installation, to ensure it’s firmly placed. Easy installtion, automotive adhesive tape is attached. Decorate your car charming luxury vivid. Please check whether this item can fit on your car before purchasing. If you not familar with DIY, please ask professional for help. Please use alcohol or agent to clean the position of the installation to make sure it without the grease. Wax or dust etc. Please ensure the position of installation can be completely fit the case before install. If meet the case of a relatively low temperature, please heating it via the hair dryer or lighter. Products within 24 hours after installed, please avoid washing your car and touching the water. Good communication is helpful for both of us to resolve any problems and issues. All of the items are new. Otherwise, replacement can be offered for defective product. Because of the different time zone, please give us some time, all the emails will be answered within 24 hours. Thanks for your understand and support!

]]> https://carbonfiberinteriors.com/real-carbon-fiber-console-gear-shift-panel-cover-fit-for-porsche-cayenne-2011-17/feed/ 0 https://carbonfiberinteriors.com/abs-carbon-fiber-interior-centraldoor-handle-cover-for-porsche-cayenne-2011-17/ https://carbonfiberinteriors.com/abs-carbon-fiber-interior-centraldoor-handle-cover-for-porsche-cayenne-2011-17/#comments Thu, 09 May 2024 23:33:54 +0000 admin ]]> https://carbonfiberinteriors.com/abs-carbon-fiber-interior-centraldoor-handle-cover-for-porsche-cayenne-2011-17/


Door Handle / Central Handle. For reference, please compare with your original one before order. This Is Aftermarket Replacement Item But Not Genuine. 1 100% brand new and high quality. 3 Perfect to match, highly practical and ornamental value. 4 Diagonal weave pattern, with polished and shiny surface, luxury look. 5 Easy installation, only buckled on original position. 6 Strict quality control standards to Build and test. Please check whether this item can fit on your car before purchasing. Due to light and screen difference, the item’s color may be slightly different from the pictures.

]]> https://carbonfiberinteriors.com/abs-carbon-fiber-interior-centraldoor-handle-cover-for-porsche-cayenne-2011-17/feed/ 0